我們介紹一下彈簧試驗機根據控制方式分的幾種機型

Weintroduce thespring testingmachine according toseveral typesofcontrolmethods

一、微機控制彈簧拉壓試驗機

Amicrocomputer control,spring tension and compression testing machine

設備采用微機控制，彈簧測試參數軟件存儲，可顯示彈簧測試曲線、打印彈簧測試報告；具有強大的數據處理能力；測試精度高、力值有效范圍寬。適用于對彈簧測試要求較高單位；

The equipmentadopts microcomputer control,spring testingparameterssoftware storage,display,printthe test curve ofspringspringtest report;has strong dataprocessing ability;high precision,wide range offorcevalue.Suitable forspring testingrequirementshigher unit;

二、手動式彈簧試驗機

Two,manual typespring testing machine

一般為數顯式可以打印，控制方式通過手動操作手柄或者搖動手輪去完成，適合測試數量不多只做抽檢的客戶使用，但是操作方式復制容易造成人為誤差，并且效率低下；

General fordigitalprint,controlbymanual operating handleorhand wheel is rotatedto complete,suitable for testingthe amount is not muchto do onlysampling ofcustomers to use,but theoperation mode ofreplicationcan causehuman error,andlow efficiency;

三、全自動彈簧試驗機

Three,full automaticspring testing machine

一般為數字顯示或者液晶屏顯示，電機拖動；實驗過程實現自動化，可設置彈簧剩余高度、彈簧變形量、彈簧力值等參數，檢測結果直接顯示，提高測試效率，克服人為誤差，是目前彈簧試驗機設備的

Generalfor the digital displayor LCDscreen display,motor drive;to realize the automation ofexperimentalprocess,can set thespringresidualheight,springdeformation,the spring forcevalue parameter,the test resultsshow,improve test efficiency,overcome the humanerror,is currentlythe preferredequipmentspring testing machine
http://www.ksshiyanji.com/

全域營銷如何驅動品牌變革？