現在再簡單介紹一下萬能試驗機（如電子萬能試驗機，液壓萬能試驗機）的保養維護方法，用戶可以仔細閱讀，這都是我們在多年的生產銷售中總結的經驗，首先主機的保養有機器所配的夾具應涂上防銹油保管；鑲鋼板與襯板接觸的滑動面、襯板上的燕尾槽面應保持清潔，定期涂一層薄的MoS2 潤滑脂;4、定期檢查鉗口部位的螺釘，如發現松動，及時擰緊;定期檢查鏈輪的傳動情況，如發現有松動，請將張緊輪重新張緊;由于液壓萬能試驗機的鉗口經常使用，容易磨損，氧化皮太多時，容易導致小活塞損傷漏油，所以鉗口處應經常打掃，保持清潔;

Now to introduce universal testing machine (such as electronicuniversal testing machine, hydraulic universal testing machine)maintenance method, the user can read carefully, this is all we are summarized in the years of production and sales experience, the first host machine maintenance fixture with should be coated withanti rust oil with steel plate and custody; liner contact sliding surface, lining the dovetail groove plate should be kept clean,grease MoS2 regularly coated with a thin layer of; screw 4, regularly check the jaw position, if found loose, timely tightening; regularly check the transmission chain, if found loose, please put the tensioner again tension because the hydraulic universal testing machine; jaw often use, easy to wear, oxidation 皮太多, easily lead to leakage of piston damage, so the jaw should be cleaned regularly, keep clean;

其次油源也要很好的維護保養，還有控制系統定期檢查控制器后面板的連接線是否接觸良好，如有松動，應及時緊固;試驗后若有一段較長的時間不用機器時，關閉控制器和電腦;控制器上的接口為一一對應，插錯接口可能對設備造成損壞;插拔控制器上的接口必須關閉控制器電源。

The second source of oil have good maintenance, regular inspection and control system controller connection panel is good contact, such as loose, should be tightened; after the test if alonger period of time than machine, close the controller andcomputer; controller on the interface of one one corresponding,inserted the wrong interface may cause damage to the equipment;plug controller interface must be shut down the power supply controller.

http://www.xinzecheng.cn/